Engineered to withstand equatorial tropical humidity, high salt concentration, and intense heavy-axle industrial cycles in Bioko Island and Rio Muni.
Refractory grade tailored for smooth metallurgical fusion under coastal African humidity conditions.
High-efficiency surface pre-treatment to eradicate oxidation before rail thermit ignitions.
Ensures exact 26±2mm gaps during track alignment in challenging field environments.
Rapid vertical sectioning guaranteeing square rail faces for flawless seam execution.
Bridging Continental African Mineral Corridors and Island Marine Terminals through Durable Continuous Welded Rails (CWR).
The industrial and commercial landscape of Equatorial Guinea is undergoing structural transformation. While historically sustained by offshore hydrocarbon reserves, the national strategic roadmap (Horizonte 2035) prioritizes industrial diversification, deep-water port logistics enhancement, intermodal transport connectivity across Rio Muni (the continental mainland), and modernization of high-throughput maritime container terminals at Malabo and Bata. Heavy commercial cranes, marine gantry systems, ship-to-shore (STS) rails, and projected transport networks require unwavering track structural integrity.
In equatorial maritime climates characterized by intense precipitation, thermal oscillations, and heavy oceanic salt mist, bolted joint bars inevitably undergo micro-cracking, joint dipping, bolt-shearing, and rapid galvanic corrosion. This is where aluminothermic rail welding (thermit welding) serves as a transformative technology for Equatorial Guinea. By transitioning from traditional fishplated rail joints to Continuous Welded Rail (CWR), port operators, municipal terminals, and continental logistics lines virtually eliminate track impact wear, dramatically reduce locomotive axle degradation, and curtail unscheduled maintenance shutdowns.
Modern port logistics depend on uninterrupted crane tracks. Thermit welding eliminates severe impact jolts caused by heavy container transfer cranes running over joint gaps.
Future connectivity linking mainland equatorial mineral corridors to export docks requires heavy-haul tracks capable of withstanding 25+ ton axle loads without joint breakdown.
Moisture-sealed welding consumables, anti-corrosive rail profiling, and proprietary crucible lining formulas prevent hydrogen cracking even under 90%+ relative humidity.
Direct maritime shipping routes from Tianjin Port to Bata ensure steady containerized deliveries of aluminothermic powder, pre-formed sand moulds, and track maintenance units.
RMTS is a premier manufacturer specializing in railroad thermit welding materials, headquartered in Tianjin, China. Operating a modern specialized manufacturing plant spanning over 5,500+ m² with more than 30 dedicated metallurgical and railway engineering professionals, we provide top-tier thermit welding solutions tailored to the strictest international railway benchmarks (EN 14730, AREMA, TB/T 1632).
We believe that a resilient track system requires superior consumables combined with meticulous installation protocols. Beyond manufacturing, RMTS provides comprehensive on-site technical training, procedure qualification records (PQR), welder certifications, and field project guidance. Whether deploying track maintenance in the Gulf of Guinea or industrial yard installations across Central Africa, RMTS stands as your reliable technical partner.
Continuous metallurgical research ensuring chemical matching with various rail profiles (UIC60, 54E1, QU120, 115RE, and crane rails).
Our R&D team formulates thermite powders matched to rail steels (R260, R350HT, heat-treated rails), preventing rail head softening and premature spalling.
RMTS actively collaborates with engineering contractors, port authorities, and railway operators in China and overseas, delivering tailored materials and operational workflows.
From heavy-haul lines to urban transit and high-speed corridors across China's extensive railway network, our solutions deliver zero-defect reliability under rigorous operational demands.
Collaborations with leading metallurgical universities keep our aluminothermic welding technologies at the forefront of clean slag separation and rapid reaction stability.
Thermite welding uses single-use kits: 1 Weld = 1 Set of Consumables (Thermit portion, precision sand mould, luting sand, ignitor). For instance, for a 10 km track section with standard 12.5 m rails:
Formula: (10,000 m / 12.5 m) × 2 rails = 1,600 consumable sets. RMTS ships comprehensive containers complete with matching hydraulic shear blades and crucible kits directly to Bata Port.
Reliable tapping, minimal slag retention, and flexible deployment configurations for challenging track terrains.

Pre-fabricated, integrated automatic tapping design. Eliminates manual thimble plugging and pre-drying steps. Light, recyclable, and moisture-resistant—ideal for rapid turnaround track closures and field emergency repairs in remote equatorial sections.

Heavy-duty multi-pour crucible lined with high-density refractory materials. Capable of enduring 50+ consecutive reactions when maintained properly, offering optimized unit-cost efficiency for extensive yard construction, port dock installation, and depot trackwork.
Aluminothermic welding plays an indispensable role across modern transportation and logistics operations.





Equipping local track teams in Equatorial Guinea with the technical skills needed for zero-defect aluminothermic welds.
From its early 20th-century origins, modern thermit technology incorporates refined pyrometallurgical elements (Vanadium, Titanium, Carbon) to match high-strength modern rail alloys smoothly.
Preparation: Rail ends must be thoroughly ground clean of rust, degreased, and aligned horizontally/vertically. Ensure rail gap spacing precisely complies with 26±2 mm to achieve balanced volumetric fusion.
Critical Field Warning: Thermit welding materials fail when exposed to water or moisture. In humid equatorial climates, storage containers and moulds must remain hermetically sealed and dry right up to the preheating cycle.
Store portion bags on elevated dry pallets in ventilated warehouses away from open flames. Handle ignitors and pastes in dedicated compliance zones to maintain chemical reactivity and worker safety.
From internal combustion rail saws and hydraulic shears to electronic rail profilers and preheating burners, RMTS delivers turnkey equipment bundles ready for field commissioning.
Connect with our technical engineers to plan rail maintenance and track upgrades in Equatorial Guinea.
Explore Full CatalogComprehensive equipment and consumable selections supporting rail joints, alignment, cutting, and maintenance operations.
High thermal shock resistance, preventing molten steel leakage during extreme high-temperature pours.
Motor-driven steel brush assembly eliminating deep oxides on Equatorial Guinea coastal lines.
Provides balanced push-pull force for precise gap setting prior to preheating.
High torque motor yielding clean, burr-free cuts without thermal distortion of the base metal.
High plasticity sealing compound preventing molten steel flashing around mould joints.
Hydraulic tensioning device ideal for stress-relief operations and zero-stress rail anchoring.
Durable rigid steel frame ensuring symmetrical clamping pressure over sand moulds during casting.
Fast, accurate hole-boring for signal bond attachments, temporary joint bars, and ground wires.